DIY How to Turn a Frame into a Jewelry Holder

DIY How to Turn a Frame into a Jewelry Holder<br /><br />This framed jewelry holder is perfect for hanging in your closet. This will prevent it from taking up any room on your dresser. The jewelry holder can hold necklaces, earrings and even a couple rings. This project is inexpensive and easy to create. The materials that you will need for the framed jewelry holder are:<br /><br />Old picture frameSpray paintStep Three: Next, spray paint the frame to a color of your choice. Then let it dry. You dont have to do this step if you like your frame the way it is.<br /><br />Step Four: Place your fabric right side down on a counter. Then place the foam board centered on it.<br /><br />Step Five: Now, fold up the side of the fabric and staple it to the back of the foam board. Keep doing this until your foam board is covered. Make sure that while you pull the fabric tight when doing this process. If you dont it may cause your fabric to be loose or wrinkly. I suggest flipping it over often to make sure that everything looks ok on the front.<br /><br />Step Six: Then place the cut piece of chicken wire into the picture frame. You can secure the chicken wire in place by using hot glue along the edges. The hot glue will hold it in place.<br /><br />Step Seven: Next, apply some more glue along the edges of the back of the chicken wire and then place the foam board fabric side towards the wire on top of the chicken wire. When looking at the front of the frame you should see the chicken wire and the fabric should be behind the chicken wire.